Thingiverse
Replacement loops
von jacla586
4
Downloads
19
Likes
0
Makes
If you know, you know.
Self explaining names.
I used a .25mm nozzle to print the hollow ones, turned out good.
Make sure you have very good bed adhesion before attempting to print (or use a brim or whatever), as the contact surface with the bed is tiny.
Self explaining names.
I used a .25mm nozzle to print the hollow ones, turned out good.
Make sure you have very good bed adhesion before attempting to print (or use a brim or whatever), as the contact surface with the bed is tiny.
Hast du dieses Modell gedruckt? Einloggen und dein Make teilen!
Melde dich an, um einen Kommentar zu hinterlassen
AnmeldenNoch keine Kommentare – sei der Erste!