Respite

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm  The Model is 200x200mm in size. You can change the X and Y but Z must remain the same.  You may print at higher layer heights below the Min Depth of 0.48mm  Actual Depth is 2.2mm Filaments Used: PLA BambuLab Basic Black Transmission Distance: 0.6 PLA BambuLab Basic Brown Transmission Distance: 2 PLA BambuLab Basic Yellow Transmission Distance: 6 PLA BambuLab Basic Blue Gray Transmission Distance: 3 PLA BambuLab Basic Gray Transmission Distance: 2 PLA BambuLab Basic White Transmission Distance: 5 This print uses 6 unique filaments. Substitute as needed. Swap Instructions: Start with Black At layer #7 (0.64mm) swap to Brown At layer #9 (0.8mm) swap to Yellow At layer #13 (1.12mm) swap to Black At layer #17 (1.44mm) swap to Blue Gray At layer #19 (1.6mm) swap to Gray At layer #22 (1.84mm) swap to White for the rest.