Retro toolbox

Hello !If you like my work, please rate it. Mini version of an old toolbox. 200x100mm base area. Removable dividers. Kitűnő ajándék lehet: -for a mechanic-for artificial nails, eyelashes-they are fishing A bit of a pain to put together, but at least it's challenging. I tested it. One of the pictures shows the necessary adhesives. It's worth gluing the fasteners of the snaps together. The dividers may require a little deburring. I recommend printing the plastic snaps more slowly and with a smaller layer height so that they are stronger.If you have any questions, don't hesitate to ask.The X4 at the end of the slt files means that 4 pieces of it need to be printed.The grip support can be difficult to remove. If this is a problem, print it upright using a brim.I made 3 versions:-smooth, simple (slim)-skin01 (honeycomb)-skin02 (striped) this is what I printedWhen assembling, make sure that the "screws" turn in the arms, otherwise it will get stuck when opening. Bb.