Retrograde Clock

A unique way to tell time. Retrograde Clock https://youtu.be/p05ZajE7QQAAssembly Guide https://youtu.be/1zD8hInFHxwParts required:- 12888 clock movement with 4.5 mm length threaded shaft (WHITE SHAFT with 4.98mm dia. hour shaft/3.12mm dia. minute shaft) with rubber washer, flat washer and nut for mounting. [Sample](https://www.aliexpress.com/item/4000266900072.html?spm=a2g0o.9042311.0.0.845b4c4dL1xttK)- 2 pcs - 18 mm x 2 mm dia. round rod (brass or stainless steel). Ends should be free of burrs and chamfered to allow for easy insertion.Tools required:- 2 mm drill bit- A reamer made with a ~50mm length of 2mm round rod with tip cut diagonally. Leave burrs and sharp edges as is.- 3mm drill bit to remove the burrs on the holes.- Pin vise for the drill bit and reamer. (3d printable included)- Wrench to tighten the clock nut. (3d printable wrench included)--- PLEASE READ:© 2022 

When you dowload the files, you are allowed to print the design for your PERSONAL USE ONLY. You DO NOT have permission to sell or share the digital files and designs in any way, form or manner.If you would like to sell physical prints, please subscribe for a monthly renewable commercial license on my patreon - www.patreon.com/boksbox Even with a license to print, I still retain the copyright to the design and digital files and the licensee is NOT allowed to sell or distribute the digital files and designs in any way, form or manner.