Ribery & Thiago

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 200x226.05mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 2.2mmFilaments Used:PLA Kingroon Black Transmission Distance: 0.4PLA+ Sunlu White Transmission Distance: 5PLA+ Sunlu Red Transmission Distance: 6PLA Kingroon White Transmission Distance: 4.7This print uses 4 unique filamentsSwap Instructions:Start with BlackAt layer #9 (0.8mm) swap to WhiteAt layer #16 (1.36mm) swap to RedAt layer #22 (1.84mm) swap to White for the rest.