Rick Sanchez

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm  The Model is 169.78x240mm in size  You may print at higher layer heights below the Min Depth of 0.48mm  The Max Depth is 2.2mm and the Actual Depth is 2.2mm Filaments Used: PLA PolyLite Black Transmission Distance: 0.3 PLA Kingroon Gray Transmission Distance: 2.1 PLA Kingroon Skin Transmission Distance: 3.7 PLA Kingroon White Transmission Distance: 4.7 This print uses 4 unique filaments Swap Instructions: Start with Black At layer #5 (0.48mm) swap to Gray At layer #11 (0.96mm) swap to Skin At layer #21 (1.76mm) swap to White for the rest.