Riptide

I added a 7mm hole down the center of the length of the sword to put a metal rod in it. EDIT: Use a steel tube or (BEST) a carbon fiber tube! Threaded rods are too flexible and heavy.
ALSO: The spelling is wrong(not my fault) so Id engrave a badge on a thin shiny metal to put over those spots. It will look fine.

I am scaling up this model in the slicer to 113.5%(to more closely match the 3ft of the "actual" sword) so the hole will be 8.1mm in diameter to fit the ~8mm threaded rods (use steel or carbon tubes!)I have.

.2 resolution. 30-40 infill. no supports or raft. NOTE: Arrange the model to be parallel with the Y axis, or perpendicular to the X. they will be less likely to fall over when the bed is moving.

If you want one made, hit me up at my etsy. I have very little free time for such things, so Ill see if I have a spot for it on my bench. ArawArtsAndBuilds is the shop.

also if you have questions on your builds, feel free to message me. We are all standing on the sho