Robotchassis for Sensorbot - Alpha-Version

These are some parts for this chassis:

https://www.amazon.de/townsister-Roboter-Plattform-Chassis-Raspberry/dp/B07DWN67NP/ref=sr_1_2?ie=UTF8&qid=1544625646&sr=8-2&keywords=roboter+chassis

If you print these parts you can mount two sensors (which you can find in the Sensorbot-Collection) to the bottom of the plate.

To screw the parts together you need some M3 and M4 screws with 10,16 and / or 20mm length as well as M3 and M4 nuts. To mount one sensor you need at least 2 M3x30mm screws.

You can mount the metal connectors of the chassis between the created parts for a higher stability.

It should be quite self explanatory, but if you have questions, then just write a comment.

I printed the parts with 20% infill, but it should still be fine with less infill.

Enjoy the parts but please notice, that soon I will upload better and more advanced models for this robot chassis.

If you printed these parts I would love to see a picture in the Make-section.

###############