Rocket feeder

Very easy and simple 3d print for a rocket feeder.Non printable parts:Spring compression type 9.0x15mm wire thickness around 0.6mmSpring compression type 6.0x19mm wire thickness around 0.5mmThe smaller spring should be glued with strong glue in one of the nests3d printing, the connecting rod, nut and the button should be printer flat on the bed with tree supports. For the nut and the rod you will need 0.2 mm nozzle with 0.06mm print height. The button could be printed with 0.4 mm nozzle. The body part could be printed with 0.4mm nozzle, I used 0.4mm nozzle with 0.2mm layer height and tree supports + 4mm outer brim. I will upload pictures how the parts should be positioned for easiest printing and maximum strength.IF YOU DONT HAVE 0.2mm nozzle, you can use 70mm long 4m bolt with nut