Roll Case

Two types of a rolling case, one uses a magnetic latch with [3mm*](http://www.gearbest.com/classic-toys/pp_621086.html?lkid=10715203) or [4mm*](http://www.gearbest.com/classic-toys/pp_443266.html?lkid=10715205) cylinder magnets. The other uses a plastic latch. I usually prefer to print these without a top layer so the infill is exposed on the top / inside, but it doesn't have to be printed that way.

Designs are customizable in Onshape if you need a particular size ([magnetic version](https://cad.onshape.com/documents/f57491789041c3f5b22761bf/w/891e07cd4b5d7cabc8777b9f/e/862208ac9db11c197058cf1a)) ([latched version](https://cad.onshape.com/documents/58e48f681b7aa90f8178e1b7/w/65ef62bb7072bd92e5999e58/e/623a95abf62cac214b8bedc0)). Different versions are mostly stored in branches.

Filaments: Cherry Red PLA, Transparent Emerald Green and Transparent Aqua PETG from [Atomic Filament](https://atomicfilament.com/), Translucent Yellow PETG from [Inland*](https://www.amazon.com/s/ref=as_