Rolling Machine

Due to the constraints of using widely available M3 hardware the roller produces large rolls. roughly 9mm OD. The center hole was left open on both sides so that the user can decide what side to have the turning wheel.Compatible with 78mm rolling paper like RAW Black. if using RAW Black filter tips I found 2 combined created a fitting size.Roller is functional but I feel it can be improved. I intend to make a second version with smaller hardware and smaller resin printed Gears allowing for a more traditional roll size and true portability. Additional Materials:13-M3x10 button head screws2x 1/8in roll pins, (Optionally can be replaced with 2x additional M3x10 button head screws)Printed Materials: 3x Tall9Tspurgear3x 9Tspurgear1x FR8mmBody1x sliderPlug1x ringgear1x FRLid6x FR_IdleRollerTexturedI do not recommend using the smooth rollers as they tend not to grip the material well. They have been included for the sake of completeness and to make iterating easier.Instructions:For the gears