Slicer Discord
ROUND SNAP LOCK KNOBS - IMPERIAL SOCKET CAP SCREW – 3D-Druckmodell von MakerOnline MakerOnline
ROUND SNAP LOCK KNOBS - IMPERIAL SOCKET CAP SCREW – Bild 1 ROUND SNAP LOCK KNOBS - IMPERIAL SOCKET CAP SCREW – Bild 2 ROUND SNAP LOCK KNOBS - IMPERIAL SOCKET CAP SCREW – Bild 3 ROUND SNAP LOCK KNOBS - IMPERIAL SOCKET CAP SCREW – Bild 4 ROUND SNAP LOCK KNOBS - IMPERIAL SOCKET CAP SCREW – Bild 5 ROUND SNAP LOCK KNOBS - IMPERIAL SOCKET CAP SCREW – Bild 6
Tools

ROUND SNAP LOCK KNOBS - IMPERIAL SOCKET CAP SCREW

101 Downloads
48 Likes
0 Makes
Zum Modell
This is a set of round knobs for use with imperial sized socket cap screws.   These are quick to print and simple to use. Simple tap the screw it - no need for glue or epoxy.   The perimeter of the opening where the screw is inserted has a number of ridges that lock in the screw. You will need a mallet or other tool to tap in the screw.    The knobs are for imperial sized screws no. 8, no. 10, 1/4 , 5/16 and 3/8.    The knobs were sized for standard screws. There is a an allowable range of tolerances for screws so you may need to shrink or expand the knob in the slicer. I suggest you print a sample to test fit. 3D printing The model requires little to no support when printing and a print profile is included. About me   I enjoy creating 3d models that others can use and appreciate. It is a very fun pastime. I find it very rewarding to see my models downloaded and printed. I put lots of thought, time and effort to create each model print out multiple iterations to make sure it works just right. If you liked my model and wish to encourage me please give it a like. If you wish you can also help me with my filament costs. You can also use the discount codes listed below. You will save and I get a small commission for certain purchases. Thank you. DISCOUNT CODES FOR ANYCUBIC PRINTERS AND FILAMENT Here are some discounts codes that you can use to save on filament and printers. Note the discount codes may not work with already discounted items. Thank you ANYCUBIC STORE DISCOUNT CODES United States site $10 off orders over $100 | Coupon code: Darren3dPrint10 $20 off orders over $200 | Coupon code: Darren3dPrint20 $30 off orders over $400 | Coupon code: Darren3dPrint30 DE/FR/ES/IT/EU site €10 off orders over €100 | Coupon code: Darren3dPrint10 €20 off orders over €200 | Coupon code: Darren3dPrint20 €30 off orders over €400 | Coupon code: Darren3dPrint30 UK site £10 off orders over £100 | Coupon code: Darren3dPrint10 £20 off orders over £200 | Coupon code: Darren3dPrint20 £30
Kategorie
Tools
Quelle
MakerOnline
Veröffentlicht
Was du zum Drucken brauchst: Mittel Niedrige Konfidenz
Warum?
keine Supports · aufwändige Nachbearbeitung
Ohne Supports Einteilig Hardware nötig
Supports 0/3
Zusammenbau 0/3
Einstellungen 1/3
Druckbett 0/3
Nachbearbeitung 2/3
Drucker
FDM / FFF
Dateiformat
STL
Material
Nachbearbeitung
Kleben, Hardware
Software
Cura, PrusaSlicer o. Ä.
Gleicher Designer, mehr Plattformen

Darren 3d print veröffentlicht auch auf

148 zusätzliche Modelle auf 1 weiteren Plattformen

Verifiziert durch übereinstimmende Modelltitel über Plattformen hinweg.
Noch keine Bewertungen
Noch keine Kommentare – sei der Erste!

Ähnliche Modelle

6 Vorschläge
Feed Blog Slicer Kostenrechner Bildersuche Einreichen Kontakt Discord ☕ Buy me a coffee
DE EN FR ES IT NL

Zur Sammlung hinzufügen