Sasuke Hueforge

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 190x235mm in sizeFilaments Used: #000000 PLA BambuLab Matte Charcoal Transmission Distance: 1.9 #1c254c PLA BambuLab Matte Dark Blue Transmission Distance: 0.4 #757575 PLA BambuLab Matte Nardo Gray Transmission Distance: 0.7 #ffffff PLA BambuLab Matte Ivory White Transmission Distance: 3.5This print uses 4 unique filamentsSwap Instructions: Start with Charcoal At layer #12 (1.04mm) swap to Dark Blue At layer #16 (1.36mm) swap to Nardo GrayBorder Only Colors from here until the end. At layer #21 (1.76mm) swap to Ivory White for the rest. Great use with https://makerworld.com/en/models/461617-hueforge-naruto-side-view?from=search#profileId-370363