SCORPIO

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 170x170mm in size You may print at higher layer heights below the Min Depth of 0.56mm The Max Depth is 2.2mm and the Actual Depth is 2.2mm Filaments Used: PLA smartfil negro Transmission Distance: 0.4 PLA smartfil morado Transmission Distance: 1.6 PLA smatfil rojo Transmission Distance: 2.3 PLA smatfil amarillo Transmission Distance: 5.8 PLA smatfil White Transmission Distance: 6 This print uses 5 unique filaments Swap Instructions: Start with negro At layer #11 (0.96mm) swap to morado At layer #15 (1.28mm) swap to rojo At layer #17 (1.44mm) swap to amarillo At layer #21 (1.76mm) swap to White for the rest.