Scuba Diving Spool

von Mirco87 · Sport & Outdoors

277 Downloads

59 Likes

145 Makes

Scuba diving spool to be printed in two parts.It allows you to store approximately 30 meters of 1.5mm line to use in your scuba diving for launching the SMB, deep stops, safety stops or entering wrecks/mines/caves.Attached you will also find the STL file to add text, for example your name, nickname or your diving group ( see orange spool PIC )Assembling the parts is very simple. Two drops of BOSTIK Super Bond and in a few seconds you will have your new scuba diving spool. **Added second printing profile, with an internal space of 32 mm to allow the storage of a greater amount of rope**

cave cavediving dive dive xtras diving reel scuba scuba dive scuba diving scubadiving scubagear spool sub tool wrech wrecker

Kategorie

Sport & Outdoors

Quelle

MakerWorld

Veröffentlicht

19.03.2024

Aktualisiert

30.04.2026

Was du zum Drucken brauchst: Anfänger Niedrige Konfidenz

Einteilig

Supports 1/3

Zusammenbau 0/3

Einstellungen 1/3

Druckbett 0/3

Nachbearbeitung 0/3

Drucker

FDM / FFF

Dateiformat

STL

Material

Software

Cura, PrusaSlicer o. Ä.

Noch keine Bewertungen

Noch keine Kommentare – sei der Erste!

Scuba Diving Spool

Ähnliche Modelle

Zur Sammlung hinzufügen