Second Generation Comma3X Sliding Dock

A sliding dock for the Comma3x to allow for quick removal without having to disconnect USB cables.

The 3MF file shows the proper orientation to print all parts in for maximum strength. Use ABS or ASA, PETG or PLA will not survive on a windshield.

You will need:

4 x m3 heat inserts

4 x m3 8mm screws

1 x USB-C 3.2Gen2 Extender (https://www.amazon.com/dp/B08RN42R76?ref=ppx_yo2ov_dt_b_fed_asin_title&th=1)

1 x USB-C 3.2Gen2 Right Angle 6-inch Cable (https://www.amazon.com/ZeroneTeck-USB-3-2-Gen-2×2/dp/B0DL67PDJ8?pd_rd_w=naVDB&content-id=amzn1.sym.800434b0-99d2-45b2-ab54-eaca0b27211f&pf_rd_p=800434b0-99d2-45b2-ab54-eaca0b27211f&pf_rd_r=G3Z7AZQQFHPXGK3N7GYK&pd_rd_wg=Yvz1v&pd_rd_r=7681e4e6-3f73-442d-88d8-aef4949525cc&pd_rd_i=B0DL67PDJ8&ref_=pd_bap_d_grid_rp_0_1_ec_pd_hp_d_atf_rp_1_t&th=1)

1 x USB-C 3.1Gen2 Right Angle Coupler (https://www.aliexpress.us/item/3256806189045772.html?spm=a2g0o.productlist.main.24.63db6p5E6p5E19&algo_pvid=ff010119-38a9-4911-8711-0a9dfd3e33b1&algo_exp_id=ff0