sequential shifter

SIZE ALL STL FILES TO 1000% IN YOUR SLICER

parts still required :
- 2x 8mm rods , length doesn't matter
- 2x 8x7x22 ball bearings , any bearing with a 8mm inner diameter will do
- 6x 4mm bolts with a lengt of >4cm
- 2x 8mm bolts , lengt around 15mm
- a spring , strength and length don't matter
- a shift a knob
- 2x microswitches with a width of 2 cm or less
--> link to microswitches that i used : https://www.banggood.com/10pcs-5A-250V-3-Pin-Tact-Switch-Sensitive-Microswitch-Micro-Switches-Handle-KW11-3Z-Limit-Switch-p-1262681.html?rmmds=myorder&cur_warehouse=CN



for assembly of the siwtch holder you need to glue it to the rail as shown in the picture