Thingiverse
Serial Pi Zero Case
por guax
10
Descargas
3
Likes
0
Makes
Serial Pi Zero Case to use with retro computing.
Originally designed to accompany an Atari ST.
You will need M2 screws, this was designed to take at least M2x6 screws, ideally a m2x10.
I used hex head screws with 3.6mm head diameter and 1.8 height. The holes are 1.8mm to allow the machine threads of the screw to bite into it.
Originally designed to accompany an Atari ST.
You will need M2 screws, this was designed to take at least M2x6 screws, ideally a m2x10.
I used hex head screws with 3.6mm head diameter and 1.8 height. The holes are 1.8mm to allow the machine threads of the screw to bite into it.
¿Has impreso este modelo? Inicia sesión y comparte tu make.
Inicia sesión para dejar un comentario
Iniciar sesiónAún no hay comentarios – ¡sé el primero!