Thingiverse

Animals

Shark Attack

by bekerek · Animals

12 Downloads

19 Likes

0 Makes

Go to Model

My 1h design work/fun in Fusion 360. I hope You like it. Print with support (for teeth). Printed on my HypeRoll 3d printer, speed 100mm/s, material PLA+ALU (Noctuo brand- PLA Metallic), layer 0.24, adaptive layers, took about 4h to finish. More at https://eprojekt3d.pl/projektowanie-3d

Category

Animals

Source

Thingiverse

Published

27.01.2019

What you need to print this: Intermediate Medium confidence

Why?

supports needed

Single piece Supports required

Supports 2/3

Assembly 0/3

Settings 1/3

Bed size 0/3

Post-process 0/3

Printer

FDM / FFF

File format

STL

Material

PLA

Est. print time

1 h

Software

Cura, PrusaSlicer, or similar

Frequently Asked Questions

Does Shark Attack need supports when printing?

Yes, Shark Attack will probably need supports for the overhangs. Tree supports work well here and are easier to remove than regular ones.

How long does it take to print Shark Attack?

According to the design notes, Shark Attack takes approximately 1 hours to print at standard settings (0.2 mm layer height, 15% infill). Actual print time varies based on your printer speed, layer height, and infill density.

What file format is Shark Attack available in?

Shark Attack is available in STL format. These files can be opened and sliced using free software such as Cura, PrusaSlicer, Bambu Studio, or OrcaSlicer for FDM printing, or ChiTuBox and Lychee Slicer for resin printing. The download is provided through Thingiverse.

Is Shark Attack free to download?

Yes, Shark Attack is available as a free download through Thingiverse. Always check the license on the original platform to understand commercial use, remixing, and attribution requirements.

No ratings yet

No comments yet – be the first!

Similar Models

6 Suggestions

Shark Attack

Similar Models

Add to Collection