Thingiverse
Sheet Metal Cutting System
door wtrssn
85
Downloads
63
Likes
0
Makes
**Sheet metal cutting system**
https://youtu.be/4YQudEBszzw
The system is used to make cuts in sheet metal, without deforming the cutting area, it is used for both steel and aluminum, with a thickness of less than 2 mm.
If you have access to an industrial shearing machine, the cuts are equally perfect, but in my case, since I do not have access to said machinery, I chose to build this simple cutting system, based on an angle grinder with a 12V lithium battery from the manufacturer Parkside ( model PWSA 12 Li A1).
Once all the parts are assembled, it allows to select the cutting height in a precise way, and also allows to slide it by a metal rule that serves as a guide to make the straight cut.
In my case the pieces I printed in ASA (110ºC hot bed and 260º hotend) since it supports higher temperatures (sparks of metal chips that come out of the metal cut) and mechanically is more resistant than the PLA.
I converted the hot bed of my Anet A8 into magnetic and as a print
https://youtu.be/4YQudEBszzw
The system is used to make cuts in sheet metal, without deforming the cutting area, it is used for both steel and aluminum, with a thickness of less than 2 mm.
If you have access to an industrial shearing machine, the cuts are equally perfect, but in my case, since I do not have access to said machinery, I chose to build this simple cutting system, based on an angle grinder with a 12V lithium battery from the manufacturer Parkside ( model PWSA 12 Li A1).
Once all the parts are assembled, it allows to select the cutting height in a precise way, and also allows to slide it by a metal rule that serves as a guide to make the straight cut.
In my case the pieces I printed in ASA (110ºC hot bed and 260º hotend) since it supports higher temperatures (sparks of metal chips that come out of the metal cut) and mechanically is more resistant than the PLA.
I converted the hot bed of my Anet A8 into magnetic and as a print
Heb je dit model geprint? Inloggen en deel je make!
Log in om een reactie achter te laten
InloggenNog geen reacties – wees de eerste!
