Side - Bin

Consider following me on Instagram (@SMACKMAX_). I try to post all of my projects to build a portfolio of my projects. https://www.instagram.com/smackmax_/ 22-10-2024: Small update, one bolt hole was missing in the under side of Tub file, now fixed! (should still work without, if anyone already printed it) 21-10-2024: Small update: Orientation & Assembly Update: Orientation: Print everything in the orientation of the final assembly: Assembly: Insert Nut into Gripper and Magnets 4x (D5x2 mm) - Install Middle Ring Onto Tub (4x M3x10 Hex) - Install Magnets onto Ring (3x (D5x 2 mm) - Install bottom to Tub 4x (M3x10 mm) - slide in the assembly (tolerances are a bit tight, but after a couple used it should be right on point for a smooth operation. *works best on sqaure ish tables, but as pictured i also use mine on round Table. *The dovetail fit might seem tight, but after testing multiple versions, this works best after a couple of uses. If that does not work you can lighty sand the dovetail. I have alot of small trash that i scoot up with my hand, losing a bit on the floor everytime. This should solve this very Niche issue that i have haha. Fits desk Thickness from 10-40 mm Installation: Snug bolt to Table pull bin Print orientation: See image in post Magnets: 8 pc (D5x2 mm) 7 pcs M3 (Hex) 10 mm