Simple mostly 3D printed generator

This generator was made for a physics project and heavily inspired by Tom Stanton's generator (check his yt video on his 2nd channel for more details, here: Printed with 0.4mm nozzle and 0.2mm layersNotes:You'll need some small rectangular magnets for this generator (64 x 10mm x 5mm x 2mm magnets, you can find them here: https://www.aliexpress.com/item/1005001614564310.html)You'll also need a coil of 0.2mm copper wires (I bought 100m), which can be found here: https://www.aliexpress.