Simple Stackable Box

Fusion 360 based customizable simple stackable box. You can customize following parameters : #1. 'tray + lid' profile(tray inner) width(tray inner) depth(tray inner) height(tray inner) corner radiustray wall thicknesslid wall thicknesstray bottom filletlid bump (recommended : 0.1mm) #2. ‘connector’ profileconnector wall thicknessouter width_1outer depth_1outer corner radius_1outer width_2outer depth_2outer corner radius_2connector bump (recommended : 0.15mm) Note: 1) connector wall thickness should be at least 1mm2) outer *_1 parameters are for side_1, while outer *_2 parameters are for side_2.ex. if side_1 is for the “tray” with parameters below, outer *_1 should be : outer width_1 = 60 + 2*2 mm, outer depth_1 = 80 + 2*2 mm, outer corner radius_1 = 10 + 2 mmex. if side_2 is for the “lid” with parameters below, outer *_2 should be : outer width_2 = 60 + 2*2 + 2*1 mm, outer depth_2 = 80 + 2*2 +2*1 mm, outer corner radius_2 = 10 + 2 +1 mm(tray inner) width = 60mm(tray inner) dept