Simplejoy - PRO

The SimpleJoy series is an excuse for me to make more retro joysticks, but with an emphasis on the basics, with a minimal amount of parts required, no supports needed, print in place, easy click together construction and not too high on the filament usage. ... Next up, here is my take on the Competition Pro series but with the rounded back end from a Powerplay Cruiser. Possibly THE cutest retro joystick I have ever designed, compact and comfortable with my favourite type of grip, the ball top. Whether you wire the joystick up straight to a D plug or use a pi zero encoder, I would suggest wire-tying the incoming cable to the loop on the inside of the base, and maybe as an extra step, a bit of hot glue to anchor things down. Links to wiring information regarding the 9-pin D plug: https://en.wikipedia.org/wiki/Atari_joystick_port http://wiki.icomp.de/wiki/DE-9_Joystick Re: encoders, I have been using RP2040 zero boards, drag & drop some files onto it: https://github.com/OpenStickCommunity/GP2040-CE I printed using basic pla, 10% honeycomb for the Base & Top and 5% rectilinear infill for the rest. The Grip (balltop) is to be printed stood up (like it is in the final build), if your bed isn't very grippy, I recommend a brim. Two of these, a trusted buddy and Deluxe Galaga on the A1200 and you are set for the night :) >>>MY PATREON & PATREON SHOP. >>>https://www.patreon.com/3DFreeman Thanks for your continued support!