Thingiverse
Sinclair C5 Disc Brake Conversion
par Wisefire
1
Téléchargements
0
Likes
0
Makes
Bearing block and brake mount for converting a Sinclair C5 to disc brakes.
Use this at your own risk. Milage may vary.
I haven't had any issues, but that doesn't ensure that you won't.
Not for the faint of heart.
No instructions as of yet. besides print everything in PETG and print the upper part laying on its side, this will ensure that you won't split it along layer lines. lower part should be printed standing right side up, as you'll then have the 2 different pieces with layer oriented differently.
Use this at your own risk. Milage may vary.
I haven't had any issues, but that doesn't ensure that you won't.
Not for the faint of heart.
No instructions as of yet. besides print everything in PETG and print the upper part laying on its side, this will ensure that you won't split it along layer lines. lower part should be printed standing right side up, as you'll then have the 2 different pieces with layer oriented differently.
Vous avez imprimé ce modèle ? Connectez-vous et partagez votre make !
Connectez-vous pour laisser un commentaire
Se connecterPas encore de commentaires – soyez le premier !