Thingiverse
Sinclair C5 Disc Brake Conversion
von Wisefire
1
Downloads
0
Likes
0
Makes
Bearing block and brake mount for converting a Sinclair C5 to disc brakes.
Use this at your own risk. Milage may vary.
I haven't had any issues, but that doesn't ensure that you won't.
Not for the faint of heart.
No instructions as of yet. besides print everything in PETG and print the upper part laying on its side, this will ensure that you won't split it along layer lines. lower part should be printed standing right side up, as you'll then have the 2 different pieces with layer oriented differently.
Use this at your own risk. Milage may vary.
I haven't had any issues, but that doesn't ensure that you won't.
Not for the faint of heart.
No instructions as of yet. besides print everything in PETG and print the upper part laying on its side, this will ensure that you won't split it along layer lines. lower part should be printed standing right side up, as you'll then have the 2 different pieces with layer oriented differently.
Hast du dieses Modell gedruckt? Einloggen und dein Make teilen!
Melde dich an, um einen Kommentar zu hinterlassen
AnmeldenNoch keine Kommentare – sei der Erste!