Thingiverse
Single motor 2 function steerable IR controlled Robot
door Rick100
9
Downloads
13
Likes
0
Makes
Youtube video:
https://youtu.be/TWOMCni3EWI
This 3d printed project is another remote controlled toy robot that is driven by a single motor. It can move forward or spin in place. It uses a two way to one way rotation mechanism to accomplish this. It has 2 control options. You can control it with 2 SPDT switches or use the IR control board I designed.The motor is an N20 gear motor. The battery is a 3 AAA battery pack or you could use a single cell lipo. The remote control is a universal infrared remote unit set up to transmit 12 bit Sony codes. The ir commands are interpreted by a microcontroller and drive the motor through a L9110s motor driver. For this project the right angle headers are not soldered to the top of the board. The 2 pin right angle header for the motor is soldered on the bottom of the board and bend slightly. The power connection for the board is a short pigtail soldered directly to the board with male Dupont connectors. The battery has female headers pins soldered
https://youtu.be/TWOMCni3EWI
This 3d printed project is another remote controlled toy robot that is driven by a single motor. It can move forward or spin in place. It uses a two way to one way rotation mechanism to accomplish this. It has 2 control options. You can control it with 2 SPDT switches or use the IR control board I designed.The motor is an N20 gear motor. The battery is a 3 AAA battery pack or you could use a single cell lipo. The remote control is a universal infrared remote unit set up to transmit 12 bit Sony codes. The ir commands are interpreted by a microcontroller and drive the motor through a L9110s motor driver. For this project the right angle headers are not soldered to the top of the board. The 2 pin right angle header for the motor is soldered on the bottom of the board and bend slightly. The power connection for the board is a short pigtail soldered directly to the board with male Dupont connectors. The battery has female headers pins soldered
Rick100 publiceert ook op
59 extra modellen op 2 andere platforms
Heb je dit model geprint? Inloggen en deel je make!
Log in om een reactie achter te laten
InloggenNog geen reacties – wees de eerste!
