Slicer Discord
Slim hook compatible with multiboard – 3D-printbaar model van MakerWorld MakerWorld
Other Hobby & DIY

Slim hook compatible with multiboard

108 Downloads
38 Likes
40 Makes
Model downloaden
These are hooks compatible with multiboard. The problem with most multiboard hooks is that they are pressure fit. The work great as long as you don't pull them. When you store cables and tapes, you tend to pull on the end of the hook, resulting in dismounted hook. Thus this design. These hooks can be very strong. They are printed horizontally maximizing their strength but they have some flex at the default fill of 15% (the higher the fill the less flex). The real weak point becomes the multiboard. The hook will probably tolerate several kilograms, but the multiboard will start to flex due to the load. It will also depend on where the multiboard is screwed to its surface. Print one and test for your application. Because there is no standard orientation of multiboard, you need to test which version (A or B, labels embossed) fits your setup. InstructionsMake sure to print the hooks and anchors flat on the bed.Print the small hooksDetermine the orientation of your multiboard. Screw bot
Categorie
Other Hobby & DIY
Bron
MakerWorld
Gepubliceerd
Bijgewerkt
Wat je nodig hebt om te printen: Gemiddeld Lage betrouwbaarheid
Eendelig Hardware nodig
Supports 1/3
Montage 0/3
Instellingen 1/3
Bedgrootte 0/3
Nabewerking 1/3
Printer
FDM / FFF
Bestandsformaat
STL
Materiaal
Nabewerking
Hardware
Software
Cura, PrusaSlicer of vergelijkbaar
Nog geen beoordelingen
Nog geen reacties – wees de eerste!

Vergelijkbare modellen

6 Suggesties
Feed Blog Slicer Kostenrekenmachine Zoeken op afbeelding Indienen Kontakt Discord ☕ Buy me a coffee
DE EN FR ES IT NL

Toevoegen aan collectie