Slim hook compatible with multiboard

These are hooks compatible with multiboard. The problem with most multiboard hooks is that they are pressure fit. The work great as long as you don't pull them. When you store cables and tapes, you tend to pull on the end of the hook, resulting in dismounted hook. Thus this design. These hooks can be very strong. They are printed horizontally maximizing their strength but they have some flex at the default fill of 15% (the higher the fill the less flex). The real weak point becomes the multiboard. The hook will probably tolerate several kilograms, but the multiboard will start to flex due to the load. It will also depend on where the multiboard is screwed to its surface. Print one and test for your application. Because there is no standard orientation of multiboard, you need to test which version (A or B, labels embossed) fits your setup. InstructionsMake sure to print the hooks and anchors flat on the bed.Print the small hooksDetermine the orientation of your multiboard. Screw bot