Thingiverse
Small two axis stepper mount.
von HSB
11
Downloads
12
Likes
0
Makes
This is a crude, generic two axis mount for stepper motors.
It fits sinano STH-36C1018 stepper motors using EasyDriver v4.4 A3967 shield and a Arduino Nano controller. The drivers fit the mounting holes in the side and the controller is fixed in place using a screw and the small disk in the horizontal mount. Power can be connected by most panel mounted connectors fitting a 8-9mm hole. The controller can be powered by USB. Use M3 nylon and metal screws.
The pictured item is assembled for demonstration without connected wires.
It could be used for directing a small camera or pointing a laser or something like that.
It fits sinano STH-36C1018 stepper motors using EasyDriver v4.4 A3967 shield and a Arduino Nano controller. The drivers fit the mounting holes in the side and the controller is fixed in place using a screw and the small disk in the horizontal mount. Power can be connected by most panel mounted connectors fitting a 8-9mm hole. The controller can be powered by USB. Use M3 nylon and metal screws.
The pictured item is assembled for demonstration without connected wires.
It could be used for directing a small camera or pointing a laser or something like that.
Hast du dieses Modell gedruckt? Einloggen und dein Make teilen!
Melde dich an, um einen Kommentar zu hinterlassen
AnmeldenNoch keine Kommentare – sei der Erste!
