Thingiverse
Snapmaker Laser Test - super simple
door sdj544
73
Downloads
27
Likes
0
Makes
A very simple laser test. This was made in Snapmaker Luban for a Snapmaker A350.
Not sure how it will work on other laser machines. Try it out and let me know.
It cuts lines from 10% to 100% power @140mm/min, 2 passes, 0.6mm pass depth (vector)
Grayscale squares from 5% to 100% black using both the stock greyscale (normal quality 7 dot/mm, 500mm/min) and b&w (4 dot/mm, 800mm/m) settings.
Test shown was done on 1.6mm baltic birch. As you can see it cut through cleanly on several of the cutting tests.
Not sure how it will work on other laser machines. Try it out and let me know.
It cuts lines from 10% to 100% power @140mm/min, 2 passes, 0.6mm pass depth (vector)
Grayscale squares from 5% to 100% black using both the stock greyscale (normal quality 7 dot/mm, 500mm/min) and b&w (4 dot/mm, 800mm/m) settings.
Test shown was done on 1.6mm baltic birch. As you can see it cut through cleanly on several of the cutting tests.
Heb je dit model geprint? Inloggen en deel je make!
Log in om een reactie achter te laten
InloggenNog geen reacties – wees de eerste!
