Thingiverse
Solar Node Case
von ciaomanuhello
2
Downloads
5
Likes
0
Makes
An outdoor rated case whit solar panel to house your lora/meshtastic/meshcore/whatever node
Uses a 88x142mm solar panel (1.25W)
Has space for a 4x18650 battery holder, a solar charge controller, a bms and your rak/heltec board
151mm x 98mm x 51mm
Print 4 spacers and glue them in the corners between Case and SPMount, whit the hole toward the center (aligned whit the hole for the PV cable).
The angled bracket keeps the panel Tilt at 67.5° if you fix it to a vertical pole. I did it this way so it wouldn't get much snow during winter and air can easily move due to convection during summer
From my tests, a RAK19003 and 9.5Ah of battery, whit 5 Hours of sun (6 to 11, august, northern Italy) can work in net zero (daily mean battery voltage remains the same).
Same position and sun, but whit an Heltec v3, and only 5Ah of battery, lasted almost a month before shutting down.
As where I am the shortest day lasts 8h 52m I am confident this can go on whitout maintenance even trough winter sto
Uses a 88x142mm solar panel (1.25W)
Has space for a 4x18650 battery holder, a solar charge controller, a bms and your rak/heltec board
151mm x 98mm x 51mm
Print 4 spacers and glue them in the corners between Case and SPMount, whit the hole toward the center (aligned whit the hole for the PV cable).
The angled bracket keeps the panel Tilt at 67.5° if you fix it to a vertical pole. I did it this way so it wouldn't get much snow during winter and air can easily move due to convection during summer
From my tests, a RAK19003 and 9.5Ah of battery, whit 5 Hours of sun (6 to 11, august, northern Italy) can work in net zero (daily mean battery voltage remains the same).
Same position and sun, but whit an Heltec v3, and only 5Ah of battery, lasted almost a month before shutting down.
As where I am the shortest day lasts 8h 52m I am confident this can go on whitout maintenance even trough winter sto
Hast du dieses Modell gedruckt? Einloggen und dein Make teilen!
Melde dich an, um einen Kommentar zu hinterlassen
AnmeldenNoch keine Kommentare – sei der Erste!
