MakerWorld
Hueforge & Lithophane
Zum Modell
Soldier Hueforge
51
Downloads
26
Likes
34
Makes
Infantry/Soldier Hueforge → 2 Colors Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 200x200mm in size - for A1 Mini, select the Printprofile - you can also scale it down if you want!You may print at higher layer heights below the Base Thickness of 0.48mmThe Max allowed Thickness is 1.84mm and the Actual Thickness is 1.76mm Filaments Used:→ PLA BambuLab Basic Black, Transmission Distance: 0.6→ PLA BambuLab Basic Jade White Transmission Distance: 5 (For White you can use other Filaments or Shiny ones. Post pictures if you use cool stuff!)This print uses 2 unique filaments Swap Instructions:Start with Black At layer #11 (0.96mm) swap to Jade White for the rest. Hope you enjoy! Thank you! Also don't forget to post pictures after you printed this Hueforge :)
Hast du dieses Modell gedruckt? Einloggen und dein Make teilen!
Melde dich an, um einen Kommentar zu hinterlassen
AnmeldenNoch keine Kommentare – sei der Erste!
