Thingiverse
Solid ESC Cover
di DarynFPV
9
Download
11
Likes
0
Makes
This is a basic ESC cover I designed for use with most ESCs sized alike DYS XM20.
Can be scaled for different sizes but his one is sized for the standard 5x14x32mm.
This is designed to shield the zip ties from propstrikes and to stay put even if both are broken. Tighter zip ties tighten the cover. Also, they isolate the ESC from the carbon arms to eliminate shorting if you don't use heatshrink.
I use SainSmart TPU and print with no supports, vertically.
210c at 45mm/s with the bed at 70c.
Free to print a personalize. But I ask that you do not sell.
Can be scaled for different sizes but his one is sized for the standard 5x14x32mm.
This is designed to shield the zip ties from propstrikes and to stay put even if both are broken. Tighter zip ties tighten the cover. Also, they isolate the ESC from the carbon arms to eliminate shorting if you don't use heatshrink.
I use SainSmart TPU and print with no supports, vertically.
210c at 45mm/s with the bed at 70c.
Free to print a personalize. But I ask that you do not sell.
Hai stampato questo modello? Accedi e condividi il tuo make!
Accedi per lasciare un commento
AccediAncora nessun commento – sii il primo!