Solo Leveling HueForge

I’m new to 3D modeling and still learning. If you find any problems or have ideas on how to improve the design, please let me know. Feedback is always welcome! This model was my early work so the model is Thick Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 112.54x200mm in sizeYou may print at higher layer heights below the Base Thickness of 1.52mmThe Max allowed Thickness is 3.28mm and the Actual Thickness is 3.26069mm #080a0d PLA PolyLite Black Transmission Distance: 0.3 #8d50bc PLA Copymaster 3D Perfect Purple Transmission Distance: 3.1 #ffffff PLA BambuLab Basic Jade White Transmission Distance: 5This print uses 3 unique filamentsSwap Instructions: Start with Black At layer #32 (2.64mm) swap to Perfect Purple At layer #34 (2.8mm) swap to Jade White At layer #37 (3.04mm) swap to Perfect Purple for the rest. Setting Layer height: 0.08Initial Layer height: 0.16Wall: 2Sparse infill density: 100%Sparse infill pattern: RectilinearTurn Off Prime