Characters & Creatures STL Download - Speed Buggyby 3dmpro

Speed Buggy is based on the title character featured in the 1973 animated series developed by Hanna Barbera. This interpretation of the character includes rarely seen details, such as the rear tail light and exhaust pipe. In addition, this design includes functional axles. The front tires are hinged, allowing for some posing of the tires. They should be stiff enough to prevent unwanted rotation. The model has been split into parts, making it easier to print and orient parts for best results. Some parts are thin and or slim, so it is important to remove supports carefully. The dashboard of the car has been designed so that the steering wheel can be positioned on the left or right, but the floor pedals are always on the left..The default scale is somewhat small, posted at the smallest size it could be printed on a resin printer, without parts errors occurring. Feel free to scale the model up in the slicer for a larger and more sturdy result. Be aware that up-scaling may affect the interaction between parts, but should not significantly prevent assembly and functionality..It will likely be necessary to scale (125% to 200%) this model up in slicers for printing on an FFF / FDM print, as they often do not have the resolution to print the small parts at default scale...Parts include the following...---------------------------------------------------- BodyShell- BodyChasis- Seat (print 2)- Steering Wheel- Roll Bar- Tail Pipe- Eyes- Antenna- Front Tire (print 2)- Rear Tire (print 2)- Front Inner & Outer Rims (print 2 of each)- Rear Inner & Outer Rims (print 2 of each)- Front Axle- Front Axle Hinges (print 2)- Hinge Pin (print 2)- Rear Axle