Splinter Cell

This is sam fisher from the splinter cell video games. Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 159.91x200mm in size You may print at higher layer heights below the Base Thickness of 0.48mm The Max allowed Thickness is 2.24mm and the Actual Thickness is 2mm Filaments Used: #080a0d PLA PolyLite Black Transmission Distance: 0.3 #434a4f PLA Chrominal Shadow Gray Transmission Distance: 3 #e2dedb PLA PolyLite White Transmission Distance: 5 This print uses 3 unique filaments Swap Instructions: Start with Black At layer #10 (0.88mm) swap to Shadow Gray At layer #15 (1.28mm) swap to White for the rest. Those are just the filaments i had on hand. use whatever you want. To scale it, change the x and y dimensions, do not change the z dimension.