Square lantern Part 2 (Frame)

IMPORTANT!!! The project it's easy but it's divided into two main steps: Laser Cutting & 3d Print . It's built in print! no glue needed or post assembly This is Second Step, 3d print frame use Nozzle 0.4mm and layer 0.2mm but you need the parts from the first step (Laser cut) before doing this…. at this link The circular compartment at the base of the lantern is designed to hold a battery-powered LED candle, with a max diameter of 40 mm. at this link the candles i used Print the frame in PLA, no glue or post-assembly is required . Instead, the project uses a clever technique involving two print pauses: When printing resumes, the frame completes and locks all components in place with a precise fit. Important: for this technique to succeed, the wood panel thickness must not exceed 3 mm, and the wood must be completely flat to avoid issues during printing. The first pause at layer 354 allows you to insert the wooden panels directly into the printed frame, when you finish placing the piece