Search tips

core oneall words must appear
"core one"exact phrase
vase -lithophaneexclude a word
Slicer Discord
3DSEARCH / Stackable Battery Holders Revised
Stackable Battery Holders Revised – 3D printable model from Thingiverse Thingiverse

Stackable Battery Holders Revised

by kb3lnn
7 Downloads
6 Likes
0 Makes
Go to Model
Revised
Stackable Battery Holders
Done by KB3LNN, Mar 19, 2018
Made by evaskp, uploaded Mar 13, 2018 thing:1004996
The models here could of not been possible with the original maker evaskp thing:1004996 but I found that if you try to fill the holder with battery's it tends to jam due to the way the battery's lay on each other. You will find that the changes that I made to this great little battery holder it works with out any jams. I have not did this for the C battery , I will soon publish them as well. So for now let me know what you think and happy printing.
This was printed on a Prusa Pro. 3 By GeeeTech. Time was about 3.5 hours. @ 300%
And with Repetier-Host software by Geeetech V0.90D
Copyright 2011-2013 Hot-World GmbH & Co. KG,
Knickelsdorf 42, 47877 Willich, German

Resolution 2mm.
30% infill
no support
no rafts
Made with Design Spark Mechanical
Source
Thingiverse
What you need to print this: Beginner Medium confidence
Why?
no supports
Support-free Single piece
Supports 0/3
Assembly 0/3
Settings 1/3
Bed size 0/3
Post-process 0/3
Printer
FDM / FFF
File format
STL
Material
Est. print time
3.5 h
Software
Cura, PrusaSlicer, or similar
Frequently Asked Questions
Does Stackable Battery Holders Revised need supports when printing?
No supports needed for Stackable Battery Holders Revised — it's designed to print clean off the bed.
How long does it take to print Stackable Battery Holders Revised?
According to the design notes, Stackable Battery Holders Revised takes approximately 3.5 hours to print at standard settings (0.2 mm layer height, 15% infill). Actual print time varies based on your printer speed, layer height, and infill density.
What file format is Stackable Battery Holders Revised available in?
Stackable Battery Holders Revised is available in STL format. These files can be opened and sliced using free software such as Cura, PrusaSlicer, Bambu Studio, or OrcaSlicer for FDM printing, or ChiTuBox and Lychee Slicer for resin printing. The download is provided through Thingiverse.
Is Stackable Battery Holders Revised free to download?
Yes, Stackable Battery Holders Revised is available as a free download through Thingiverse. Always check the license on the original platform to understand commercial use, remixing, and attribution requirements.
No ratings yet
No comments yet – be the first!
Feed Blog Slicer Cost Calculator Image Search Submit Kontakt Discord ☕ Buy me a coffee
· Impressum · Privacy
DE EN FR ES IT NL

Add to Collection