Thingiverse

Stackable can dispenser

by distrubi

1.7k Downloads

1.5k Likes

5 Makes

Go to Model

### New version V2 available ###
https://www.thingiverse.com/thing:5957339

###Stackable can dispenser

**I've uploaded different dispensers:**
* Ø58x115mm (250ml)
* Ø58x146mm (330ml)
* Ø67x124mm (355ml)
* Ø54x134mm (250ml redbull)

There is a "short version" of each dispenser so you can print it on a 200x200 bed

***
**Edit 2017/03/18:**
I've uploaded a "short version" of the dispenser. This should fit onto a 200x200 bed
**Edit 2017/04/07:**
Added .stl-files for the 355ml cans. I've also uploaded a screenshot so you can see how many 355ml cans fit into the dispenser.
**Edit 2017/08/22:**
Added .stl-files for the 250ml redbull cans as requested in the comments. Files are named 250rb / 250rb_short
***

I've only printed the 250ml version but the others should work as well. (Let me know if anybody tested it)
***
*I used the following can model in the above renderings:*
*https://grabcad.com/library/coke-can-2012*

can can dispenser coca cola coke dispenser fridge kitchen kitchen tool soda soda can soda can holder can can dispenser coca cola coke dispenser fridge kitchen kitchen tool soda soda can soda can holder can can dispenser coca cola coke dispenser fridge kitchen kitchen tool soda soda can soda can holder

Source

Thingiverse

What you need to print this: Beginner Low confidence

Single piece

Supports 1/3

Assembly 0/3

Settings 1/3

Bed size 0/3

Post-process 0/3

Printer

FDM / FFF

File format