Stackable Corner Unit

Stackable corner unit. Design Concept. This small corner unit was thought for people who do not have much space, the corners are usually wasted or any other decoration or container that are together creates another corner to take advantage of, this design is simple and can be stacked as many spaces as needed, has joints to secure each space, you only need a little glue for the lid and that is well fixed, if you need to add more modules, you can continue adding down. Print Setttings. It was printed on a K1C with an estimated time of 1:45H, 0.2 layer height, 10% cross hatched infill, 2 perimeters, 4 layers top and bottom, no supports required, at a speed of 120mm/s (but you can increase the speed without problem), this only contemplates 1 space, the lid and the joints. It can also be scaled larger if space is needed. Assembly. It only requires to insert the joints in their spaces, the space is very tight to avoid loose and separate the pieces easily, you may need to add a little oil to facilitate the joints or reduce a little the size of the joints, it depends on the calibration you have in your printer.