Thingiverse
Stackable Mini Storage Box
di blecheimer
76
Download
265
Likes
0
Makes
I needed a Stackable Mini Storage Box for my latest small parts supply shipment. There are already some very nice boxes on thingiverse, but I wanted a more efficient print that does not use a lot of filament. My box weights only 72g and can be printed in under 90 min if you are using a 0.4mm HighFlow nozzle.
The size is 149 x 106 x 79mm and it has a volume of 970ml. The box and its lid is scalable to an extent. I successfully printed a 125% version.
For easy storage of empty bins they can be stacked inside each other. Besides that you can securely stack closed boxes on top of each other. The integrated interlocking pattern will keep the box-tower stable.
Print preparation:
Make sure that your print bed is clean and grease-free and use a quality brand and dry filament.
Print settings:
Use a 0.4mm nozzle with 0.2mm layer standard settings. Turn on Spiral Vase mode, set the outer wall to 0.8mm line width. You need 8 bottom layers to get the pattern on the box and lid right. Slightly red
The size is 149 x 106 x 79mm and it has a volume of 970ml. The box and its lid is scalable to an extent. I successfully printed a 125% version.
For easy storage of empty bins they can be stacked inside each other. Besides that you can securely stack closed boxes on top of each other. The integrated interlocking pattern will keep the box-tower stable.
Print preparation:
Make sure that your print bed is clean and grease-free and use a quality brand and dry filament.
Print settings:
Use a 0.4mm nozzle with 0.2mm layer standard settings. Turn on Spiral Vase mode, set the outer wall to 0.8mm line width. You need 8 bottom layers to get the pattern on the box and lid right. Slightly red
blecheimer pubblica anche su
235 modelli aggiuntivi su altre 3 piattaforme
Hai stampato questo modello? Accedi e condividi il tuo make!
Accedi per lasciare un commento
AccediAncora nessun commento – sii il primo!
