Stackable Screwdriver Bit Tray

Here's a stackable bit holder to better organise your screwdriver bits.This bit holder tray is sized at 110 x 63 x 12mm (L x W x H) and can hold up to 54 bits (on the large bit tray) and a total of 76 bits (on the small & large bit tray, with36 large bits and 40 small bits).Comes with push out tools that can be used to puch bits out from under the tray, if the bits sit in too tight or are difficult to get out.You can also stack one tray over the other. To do this simply print 4 large push out tools and plug them into bit holes at each corner and simply stack them over each other. You can play around with the configuration.Print in PLA or any material of your choice.Also features 2 push bits to push the bit out of the socket from below if they are too tight to remove.Print SettingsPrint Material : PLAInfill : 10-20% is sufficientWalls : 4Top/Bottom : 4If you want to purchase this for commercial purposes (resale or use as part of your product sale) feel free to reach out to me.Thank you for your support