Stackable Twist-Lock Containers

UPDATE 04/02/2026 - Stackable Twist-Lock Containers Part 3! New sizes. Upper parts in 50 and 60 mm and bottom parts in 50, 60 and 100mm. All with 2, 3, 4 and no dividers inside. Check here: UPDATE 02/02/2026 - Check Part 2 for additional containers in size of 20,30 and 40mm with 2,3 and 4 dividers here: Stackable Twist Lock Containers Practical storage solution for your household or workshop. Store your screws, nuts, washers, bearings, electronic components, magnets, switches or connectors. Any small and loose items you like! Originally designed to use in the workshop during power tools reparation process to keep screws and small parts organized. Sometimes it takes days or weeks to get replacement parts and in the meantime you may forget what kind of screw goes where when you keep everything together. This simple storage containers solve this problem. Housing screws – first container. Two lengths? Split version. Add another container, put electronics screws and parts. Another one - gear housing screws. Etc, etc. When you finished just add the lid. Put container with the rest of the parts so no screw will be missing. Time to put your tool back together? Just use screws in reverse order :) This container may also help during initial part segregation when building RC models or any DIY project with lots of small parts. About the model: Container diameter – 73mm outside, 70mm inside. Storage height 20, 30 and 40mm. Fast print – around 1 hour each container. Low filament use – 18-24g each part, lid 14g. Print it in standard PLA or PETG. This is work in progress. These containers works perfectly for my needs but may need some modifications for yours. If you have any problems or suggestions please leave the comments! If you like the model and you want to give it thumbs up, please also consider downloading it. It cost you just one additional click and it’s very important to me. Also check my other models, maybe you will find something interesting :) Thank you! Happy printing