Starship Launch Hueforge

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 203.79x250mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 1.6mmFilaments Used:PLA BambuLab Basic Black Transmission Distance: 0.6PLA Kingroon Gray Transmission Distance: 2.1PLA Kingroon Orange Transmission Distance: 4.6PLA Kingroon White Transmission Distance: 4.7This print uses 4 unique filamentsSwap Instructions:Start with BlackAt layer #9 (0.8mm) swap to GrayAt layer #13 (1.12mm) swap to OrangeAt layer #16 (1.36mm) swap to White for the rest.