Steam Engine kit

Steam Engine Model KitRequires assembly , all screws can be 3d printed and are included in modelPlease add your own supports on the parts that require it Assembly instructions: Attastch the main cylinder to the base with the 4 m8 screws2. Add the other half of the base 3, Add the slider plate if needed( recoomended only if base was printed in two pieces) and the slider joint4.Add the slider covers with the short screws5.Assembly the bearings and place them on the base 5.Tighten the 4 screws for the bearings ( here the GIF was too large to be uploaded) 6. Add the side shaft with the cam and security pins attatched <img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000672958/design/2