Thingiverse
Stenoboard
by sffubs
21
Downloads
28
Likes
0
Makes
Heavily inspired by the Georgi, this is my handwired 30 key steno board.
It's meant for use on the sofa in the evenings, so I can learn Plover in comfort. The keyswitches are Kailh Choc light blue, with MBK keycaps. The trackpoint module in the centre was taken from a 2005 Thinkpad, and the controller is a pro micro. You will also need m2.5 bolts to secure the backplate, m3 bolts and nuts to secure the trackpoint, and signal diodes for the switches.
My lack of Plover experience means typing is slow (10 words a minute), but I am enjoying it. I still need to play with a QMK chording engine to get QWERTY working.
The CAD can be found here: https://cad.onshape.com/documents/08150707e5d2f3573d9d1ba7/w/1622667eb80fae71eae1e48e/e/e5beb4f5d69ae07c9f252983
It's meant for use on the sofa in the evenings, so I can learn Plover in comfort. The keyswitches are Kailh Choc light blue, with MBK keycaps. The trackpoint module in the centre was taken from a 2005 Thinkpad, and the controller is a pro micro. You will also need m2.5 bolts to secure the backplate, m3 bolts and nuts to secure the trackpoint, and signal diodes for the switches.
My lack of Plover experience means typing is slow (10 words a minute), but I am enjoying it. I still need to play with a QMK chording engine to get QWERTY working.
The CAD can be found here: https://cad.onshape.com/documents/08150707e5d2f3573d9d1ba7/w/1622667eb80fae71eae1e48e/e/e5beb4f5d69ae07c9f252983
Did you print this model? Sign in and share your make!
Sign in to leave a comment
Sign inNo comments yet – be the first!
