Stormtrooper Scratch Painting

Project: StormScratch.hfpPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 129.61x200mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 2.3mm Filaments Used: PLA PolyLite Black Transmission Distance: 0.3 PLA BambuLab Basic Beige Transmission Distance: 8 PLA PolyLite Grey Transmission Distance: 1 PLA PolyLite White Transmission Distance: 5This print uses 4 unique filaments Swap Instructions: Start with Black At layer #5 (0.72mm) swap to Beige At layer #9 (1.36mm) swap to Grey At layer #11 (1.68mm) swap to White for the rest. _____________________________________________________________________If you like my models and would like to support my 3D printing endeavors, I now have a Patreon! Subscribing to the $10 tier will grant you a commercial license to sell the physical prints of any of my models._____________________________________________________________________