Stranger Things

Hueforges can be resized, only change the X and Y scale, leave the Z height the same. Stranger Things Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 133.4x200mm in size You may print at higher layer heights below the Base Thickness of 0.48mm The Max allowed Thickness is 1.84mm and the Actual Thickness is 1.84mm Filaments Used: PLA Sunlu Meta Black Transmission Distance: 1 PLA+ Sunlu Red Transmission Distance: 4.8 PLA+ Sunlu Yellow Transmission Distance: 4 PLA Elego White Transmission Distance: 5 This print uses 4 unique filaments Swap Instructions: Start with Black At layer #8 (0.72mm) swap to Red At layer #14 (1.2mm) swap to Yellow At layer #17 (1.44mm) swap to White for the rest or Border Only Colors. At layer #23 (1.92mm) swap to Black or any color for the rest. If you have any requests on a new Hueforge, feel free to ask — I’ll see what I can do!