Thingiverse
Structure Sensor Cover
door laird
25
Downloads
15
Likes
1
Makes
I just got a Structure.io Sensor. I printed the awesome iPhone 5 case http://www.thingiverse.com/thing:368570 and immediately realized that I wanted a cover to protect the glass front. So I took the CAD model from the SDK and whipped up a little cover in OpenSCAD to print and share.
It snaps in place when printed in PLA. If you print in ABS, you might need to shrink by 1-2% to get a tight fit. It's quite thin, so you might as well print 100% fill.
Print it flat side (where "structure" is written) down, as it's oriented in the STL file. The text is hollow for the first layer or two.
It snaps in place when printed in PLA. If you print in ABS, you might need to shrink by 1-2% to get a tight fit. It's quite thin, so you might as well print 100% fill.
Print it flat side (where "structure" is written) down, as it's oriented in the STL file. The text is hollow for the first layer or two.
Heb je dit model geprint? Inloggen en deel je make!
Log in om een reactie achter te laten
InloggenNog geen reacties – wees de eerste!
